Filter
Top Products
Installation
Warning! It is dangerous to alter the
specifications or attempt to modify this
product in any way.
This appliance is heavy. Care should be
taken when moving it.
Care must be taken to ensure that the
appliance does not stand on the
electrical supply cable.
Any electrical work required to install
this appliance must be carried out by a
qualified electrician or competent
person.
Any plumbing work required to install
this appliance must be carried out by a
qualified plumber or competent
person.
Unpacking
• Remove all packaging before positioning
the machine.
• If possible, position the machine next to a
water tap and a drain.
Fitting under a counter
(Kitchen worktop or sink)
By removing the machine’s worktop, you can
install it under a close fitting sink unit or a pre-
existing top, providing the dimensions of the
recess correspond to those shown in the
picture.
Proceed as follows:
Remove the machine’s worktop by
unscrewing the two rear retaining screws (1),
pull the worktop from the back of the machine
(2) and slide out the front slots, lifting the
worktop (3).
28