John Lewis JLDWW 1205 Dishwasher User Manual


 
The wash results are not satisfactory
The dishes are not clean
The wrong programme has been selected.
The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.
The spray arms do not rotate freely due to incorrect
arrangement of the load.
The filters in the base of the washing compartment are
dirty or incorrectly positioned.
Too little or no detergent has been used.
Where there are limescales deposits on the dishes; the
salt container is empty or the incorrect level of the water
softener has been set.
The drain hose connection is not correct.
The salt container cap is not properly closed.
The dishes are wet and dull Rinse aid was not used.
The rinse aid dispenser is empty.
There are streaks, milky spots or a
bluish coating on glasses and dishes
Decrease rinse aid dosage.
Water drops have dried onto
glasses and dishes
Increase rinse aid dosage.
The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
Technical data
Dimensions Width
Height
Depth
60 cm
85 cm
61 cm
Electrical connection - Voltage - Overall
power - Fuse
Information on the electrical connection is given on the
rating plate on the inner edge of the dishwasher door.
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Capacity 12 place settings
Weight 42,5 kg
27