Filter
Top Products
Half load option available with programme:
Prewash
YES (no impact on washing programme)
Consumption values
1)
Programme Programme
duration
(in minutes)
Energy
consumption
(in kWh)
Water consumption
(in litres)
70° Intensive
110 - 120 1,8 - 2,0 23 - 25
45°-70° Auto
90 - 115 1,1 - 1,5 12 - 23
50° Bio
2)
150 - 160 1,0 - 1,2 12 - 14
60° Quick
30 0,9 9
Glass
60 - 70 0,8 - 0,9 14 - 15
Prewash 12 0,1 4
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) Test programme for test institutes.
When the dishwasher is first
installed
Before using your dishwasher for the first
time:
• Ensure that the electrical and water
connections comply with the installation
instructions
• Remove all packaging from inside the
appliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as "3 in 1", "4 in 1", "5 in 1"
etc... set the Multi tab function (see
"Multi tab function").
The water softener
The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would have
a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water
hardness is measured in equivalent scales,
Clarke degrees, French degrees (°TH) and
mmol/l (millimol per litre - international unit
for the hardness of water).
The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.
10