John Lewis JLDWW 1206 Dishwasher User Manual


 
The drain hose can face either to the right or
left of the dishwasher.
Ensure the hose is not bent or squashed as this
could prevent or slow down the discharge of
water.
The sink plug must not be in place when the
machine is draining as this could cause the
water to syphon back into the machine.
If you use a drain hose extension it must be
no longer than 2 metres and its internal
diameter must be no smaller than the
diameter of the hose provided.
Likewise the internal diameter of the
couplings used for connections to the waste
outlet must be no smaller than the diameter
of the hose provided.
When connecting the drain hose to an
under sink trap spigot, the entire
plastic membrane (A) must be
removed. Failure to remove all the
membrane will result in food particles
building up over time eventually
blocking the dishwasher drain hose
spigot.
Our appliances are supplied with a
security device to protect against the
return of dirty water back into the
machine. If the spigot of your sink has
a "no return valve" incorporated this
can prevent the correct draining of
your dishwasher. We therefore advise
you to remove it. When connecting
the drain hose to an under sink trap
spigot, the entire plastic membrane
(A) must be removed. Failure to
remove all the membrane will result in
food particles building up over time
eventually blocking the dishwasher
drain hose spigot
30