Filter
Top Products
9
Ⅲ Pull the plug and the feed wire out of the wire box on the back
of the machine.
Ⅲ Put the plug in.
Ⅲ Do not switch the machine on.
Ⅲ Press the draw-off key for about 3 seconds. Now, the
,
,,
symbols light up.
Ⅲ Now select the corresponding level with the draw-off key
and press the ON/OFF switch in order to save the setting.
The symbols go off.
The water hardness only need to be set before the first use of
the machine or if a different water quality is used.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
3.7 Adjustable automatic switch-off
You can amend the automatic switch-off time of 1 1/2 hours set by
Jura. The machine offers you three levels for this:
1st level
The symbol lights up. The automatic switch-off is not acti-
vated.
2nd level
The , , symbols light up.
The automatic switch-off is set to 1 1/2 hours.
3rd level
The , , , , , symbols light up.
The automatic switch-off is set to 3 1/2 hours.
In order to set or alter the automatic switch-off time, please
proceed as follows:
Ⅲ Connect the plug with the mains.
Ⅲ However, do not switch the machine on.
Ⅲ Please the draw-off key for about 3 seconds. The , ,
symbols light up.
Ⅲ Select the required level with the draw-off key.
Ⅲ Press the ON/OFF switch in order to save the required level.
If you do not carry out a change of level for longer than 30
seconds, the display goes off. The last figure you have stored
remains valid.
4. First start of operation
4.1 Fill system with water
Ⅲ Switch your machine on with the ON/OFF switch.
Ⅲ The symbol lights up.
Ⅲ Place an empty cup under the pivoting nozzle for hot water/
steam (13).
Ⅲ Switch the selector switch for hot water/steam (12) to the
position. The machine now lets off water and the symbol
flashes at the same time.
Ⅲ If the symbol lights up on the display, turn the selector
switch for hot water/steam (12) back to the position.
E