Jura Capresso S9 Coffee Grinder User Manual


  Open as PDF
of 6
 
Impressa S9 One Touch Quick Reference Guide
T
his Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
RED TEXT represents display text.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Clearyl Filter Cartridge now!
3. Push the main power switch in the back of the machine.
4. Push the ON/OFF button in the display. When the display
reads
FILL SYSTEM / PRESS STEAM place a cup under
the frothXpress and push the Rinse button.
SYSTEM FILLING then HEATING UP. PRESS RINSE.
5. Place a cup under the coffee spouts and press the RINSE
button. MACHINE RINSING. COFFEE READY.
6. Place a large cup underneath the coffee spouts and press
the 1-CUP coffee button.
1 COFFEE: The machine
starts grinding and brewing. Repeat once. Discard the first
two cups of coffee.
B) Daily Preparation
1. Fill fresh water in tank and check bean container.
2. Push ON/OFF button.
HEATING UP. PRESS RINSE. Place
a cup under the coffee spouts and press the RINSE button.
MACHINE RINSING. COFFEE READY.
Important: You can only brew coffee when display shows
COFFEE READY.
C) Grinding and Brewing Coffee
Four pre-set coffee buttons:
1 ESPRESSO, 2 ESPRESSI,
1 COFFEE, 2 COFFEES. These buttons are pre-set for
strength (five settings), cup size (1 to 8 oz. per cup) and
temperature (HIGH, NORMAL). In programming you can
change all three functions.
To brew coffee:
SELECT
PRODUCT
ON/OFF
Rinse
COFFEE
READY
Four Coffee Buttons
A LA Carte
Rotary Dial
with
Push-Button
68206
next