Jura Capresso S9 Coffee Grinder User Manual


 
Pre-warm cup, see "E) Using Hot Water"
C
OFFEE READY
.
Place a cup under the Dual Coffee Spouts
and push one of the four coffee buttons. Display shows e.g.
1 ESPRESSO and coffee flows into your cup and stops
automatically. ENJOY then COFFEE READY.
During brewing you can override the strength and the cup
size by turning the Rotary Dial (behind the door on the left
side). NOTE: Cup size for 2-cup buttons is shown PER CUP!
Important: You can always stop the flow of coffee by
pushing any of the coffee buttons.
A LA CARTE button see Instruction Book, page 17.
D) Changing the Grinder Fineness
Important: You can only adjust the fineness during the
actual grinding process.
1. Open the bean container lid and turn the dial while grinding:
larger dots: coarser; smaller dots: finer.
2. For darker, oily beans, grind somewhat coarser. For lighter
beans, grind somewhat finer.
E) Using Hot Water. Place a cup
underneath the Hot Water Spout
and turn the Selector Dial until
display shows
WATER. Push the
Selector Dial, water begins flowing,
push again to stop the water flow.
F) One Touch Cappuccino. The S9 OT features the Auto
Cappuccino System with two spouts located behind each
other. The front spout produces steam (steam nozzle). The
rear spout produces high pressure brewed coffee. Attached
to the steam nozzle is the removable frothXpress system.
It siphons, steams and froths milk.
Dual
Coffee
Spouts
Hot
Water
Spout
Cappuccino Latte Macchiato
button button
Selector Dial with Push-Button
Hot Water
Portion
Hot Water
Milk Portion
Milk
Coffee
spout
Milk/Steam
spout
Frothing range
Steaming
range
Steam only
no siphoning
DIAL
+
+
_
_
frothXpress System