Filter
Top Products
1. Fill the thermal milk container with milk and attach to the
frothXpress system. Important: Make sure all parts are
connected tightly, otherwise siphoning does not work.
2. Set the frothXpress dial to the 12 o’clock position for
frothing for cappuccino or to the 6 o’clock position for
steaming for latte.
3. Place a cup underneath the Cappuccino System.
4. Push the Cappuccino button. The S9 OT starts grinding,
the display shows
CAPPUCCINO, then coffee strength
(bean graphic). It siphons, heats and froths milk for 14
seconds and adds 2 oz. of high-pressure brewed coffee.
Display shows
ENJOY then COFFEE READY.
5. For hotter milk in either position move the frothXpress dial
towards the (+) plus symbols.
NOTE: For preparing Café Mocha, Latte Macchiato, Hot Milk
and Hot Chocolate see Instruction Book (page 19).
G) Cappuccino Rinsing:
After preparing a beverage with milk, the S9 OT shows
COFFEE READY / RINSE CAPPUCCINO and the Rinse
button illuminates. It takes a few seconds and makes sure
that your frothXpress is free of any milk.
• Turn frothXpress dial to the 3 o’clock position and place a
cup underneath the cappuccino system.
• Push Rinse button
CAPPU. RINSING. Hot water flows
through the frothXpress and stops.
COFFEE READY.
• Turn the frothXpress dial back to your preferred position.
H) Factory Settings, Beverage Buttons:
• All coffee buttons are set to temperature
HIGH.
• The hot water temperature is set to XHIGH.
• 1-CUP Espresso button – 2 oz./ STRONG.
• 2-CUP Espresso button – 2 oz. per cup / XSTRONG.
• 1-CUP Coffee button – 5 oz./
STRONG.
• 2-CUP Coffee button – 5 oz. per cup / XSTRONG.
• A La Carte button – 7 oz.
• Cappuccino; one-touch button – 14 seconds milk,
0 seconds pause, 2 oz. coffee /
NORMAL.
• Latte Macchiato; one-touch button – 14 seconds milk,
15 seconds pause, 2 oz. coffee / STRONG.
• Milk portion; Selector Dial – 14 seconds milk,
• Water Portion; Selector Dial – 5 oz.;
XHIGH.
All other settings see chapter 5, Operating Instructions.
I) Re-Programming, Beverage Buttons:
Example: Re-program the Cappuccino button to:
4.0 oz. of coffee, extra strong, milk production for
20 seconds, temperature stays as is (HIGH).
COFFEE READY
1. Open Front Cover and push and hold the Rotary Dial
until the display shows
MAINTENANCE.
2. Turn Dial to PRODUCTS and push Dial. Display shows
SELECT PRODUCT.