Filter
Top Products
3.Push Cappuccino button. Display shows
COFFEE 2.0 OZ.
4.Push the Dial,
COFFEE 2.0 OZ and turn until
display shows
COFFEE 4.0 OZ.
5.Push Dial to confirm:
CONFIRMED3 then
COFFEE 4.0 OZ.
6.Turn the Dial until display shows AROMA and the
current strength setting of three beans.
7.Push the Dial, NORMAL and turn until display
shows
XSTRONG with five beans.
8.Push Dial
CONFIRMED 3 then XSTRONG.
9.Turn the Dial until display shows
MILK 14 SEC
10.Push dial, MILK 14 SEC, and turn until display
shows MILK 20 SEC.
11.Push Dial:
CONFIRMED 3 then MILK 20 SEC.
12.Turn Dial until the display shows
EXIT and push.
SELECT PRODUCT.
13.If you do not want to change another button, turn
Dial until the display shows EXIT and push.
COFFEE READY.
For more programming options see Instruction Book,
pages 24 through 29.
J) Installing the Clearyl Cartridge
• Rinse cartridge under running water. Snap the
extension rod onto the top of cartridge. Insert into
Water Tank reception, make sure tapered end fits
snugly inside the fins. Close cartridge holder.
• Fill tank with cold water and replace.
Activating the Clearyl Cartridge:
You must activate the cartridge for the machine to
monitor it properly. Otherwise the S9 OT assumes
decalcifying mode.
COFFEE READY.
1. Push Rotary Dial. Display shows
MAINTENANCE.
2. Turn Dial until display shows FILTER NO. Push Dial
to enter the program.
3. Turn Dial until
FILTER YES and push to confirm.
CONFIRMED 3 then INSERT FILTER/PRESS
STEAM. The Rinse button illuminates.
4. Place a 20 oz. container under the frothXpress and
turn the frothXpress dial to the 3 o'clock position.
5. Push the Rinse button.
FILTER RINSING. For the
next 60 seconds the machine will push water
through the cartridge and the frothXpress system.
Initially, the water may have a slight discoloration. The
program stops automatically.
COFFEE READY.
6. Turn frothXpress dial back to your preferred setting.
Please note: As long as the filter is activated, the
water hardness setting is automatically turned off.