Filter
Top Products
KAIRAK Page 2
- 2 - IM-ES-REV 5-09-06.doc5-09-06
GENERAL
Kairak KRES model refrigerated equipment stand units are available in many lengths from 36 to
120 inches long. These units are available as a refrigerated or freezer storage compartment.
The condensing systems are designed to be installed with minimal clearance to walls or other
equipment.
These models are available as self-contained or remote. Standard features on these models
include electronic temperature control, all stainless steel construction (galvanized back), 4-inch
casters for self-contained models and 6-inch legs for remote models, double or single wide
drawers and exterior dial thermometer. Available options include, marine or flat top, stainless
steel back, 6-inch casters and drawer locks. Some options are not available on all models.
INSTALLATION
Prior to installation, test the electrical service to assure that it agrees with the specifications of
the equipment marked on the data plate. The data plate is located inside the storage cabinet.
(See Fig. 1)
Fig. 1
UNPACKING
Inspect equipment for shipping damage prior to installation. If shipping damage is found, save
the packing materials and contact the carrier within 15 days of delivery. Some components are
packed and shipped inside the storage cabinet to avoid damage during shipment. Remove
these items from the cabinet and remove packing materials. See “Installing Parts Shipped
Loose” for installation instructions. Cut the plastic ties holding the shelves in place.
Serial No.
Electrical &
Refrigeration
Specifications
SAMPLE