Filter
Top Products
KAIRAK Page 3
- 3 - IM-ES-REV 5-09-06.doc5-09-06
LOCATING THE EQUIPMENT
All model lengths can be installed with minimal clearance at the back and sides of the units
INSTALLING PARTS SHIPPED LOOSE
COMPRESSOR FILTER
Remove louvered panel by lifting up and pulling out entire panel. Slide the filter into the tracks
located below the compressor compartment. Be careful not to catch the filter on sharp edges
when installing. Replace louvered panel by installing top of panel into track and pushing in the
bottom so that the locking clips fit inside the opening. (See Fig. 2).
Fig. 2
Installing Filter Replacing louvered panel