Filter
Top Products
KAIRAK Page 8
- 8 - IM-ES-REV 5-09-06.doc5-09-06
On remote models, the controls can either be inside the control cabinet similar to that shown in
Fig. 5 or inside the refrigerated base as shown in Fig. 6.
KRES Remote
Fig. 6
On both self-contained and remote refrigerated units, the temperature control should be set at
37°F with a 3°F differential. This display should read between 34°F and 40°F. The temperature
control setting is “locked” to avoid unauthorized adjustments. Therefore, adjustments to the set
point must be made by an authorized service technician.
On freezer base units, the temperature control should be set at 0°F with 2°F differential.
Temperature display should read between –2°F and 2°F.
Base
Temperature
Control