Filter
Top Products
10
7. Use the ‘PULSE’ speed setting to
crush ice. To crush ice, place no
more than 1 cup of ice cubes into
the blender jug and replace the
lid tightly. Place blender jug on
the motor base and switch on at
the power point. Turn the Speed
Control Dial in an anti-clockwise
direction and hold it in this
position for approximately 5-10
seconds, and release. Repeat
until ice is crushed to the desired
consistency. Switch off at the
power point and remove ice
from the blender jug.
8. After use, ensure the blender
is switched off by turning the
Speed Control Dial to the ‘OFF’
position. The indicator light on the
Speed Control Dial will extinguish.
Switch off at the power outlet and
remove the power cord. Allow
the blender to cool before storing.
NOTE: During the blending
process, ingredients may stick
to the sides of the blender jug.
To push the food back on the
blades, turn the Speed Control
Dial to ‘OFF’ and switch off at
the power outlet and remove
the power cord. Remove the
lid and use a plastic spatula
to scrape down the sides of
the jug. Replace the lid before
recommencing blending.
Using Your Kambrook Blender continued
NOTE: If the blades become
stuck, immediately turn the
Speed Control Dial to ‘OFF’ and
switch the power off at the power
outlet and remove the power
cord. Remove the jug from the
motor base and remove the lid.
Use a plastic spatula to dislodge
the food or liquid from the
blades. Replace the lid before
recommencing blending.
WARNING: Do not
process boiling liquids or
hot ingredients. Allow hot
ingredients to cool before
placing them into the
blender jug.