Kenmore 31130 Ventilation Hood User Manual


 
8
WARNING: Improper grounding can result in a risk of electric shock. Consult a qualifi ed electrician
if the grounding instructions are not completely understood, or if doubt exists as to whether the
appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short,
have a qualifi ed electrician install an outlet near the appliance, in accordance with all applicable codes
and standards. Turn off electrical power at service entrance before wiring.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
WIRING INSTALLATION
Position the outlet within the space covered by the decorative
ue. Place the outlet at a maximum distance of 24” (from where
the cord exits from the hood). The center of the outlet must be
positioned at 2¾” from the center of the future hood location
(as illustrated beside). Make sure this does not interfere with
a mounting bracket fastening area or with the decorative ue
(where the ue touches the wall).
HE0106A
HE0107
CAUTION: The BLUE wires are for a make-up
air device option (not available in Canada). Never
remove the caps on the BLUE wires end.
!