Filter
Top Products
[ CAUTION ]
To avoid property damage or injury, observe the following:
Confirm shelf is secure before placing items on shelf
Handle tempered glass shelves carefully Shelves may
break suddenly if nicked, scratched, or exposed to sudden
_ temperature change
Door Storage
Milk Savor TM (some models)
The temperature-controlled Mitk Savor TM
keeps beverages and other items up to 5" F
(3= C) colder than the rest of the fresh food
sectionAirinleta,owsairfromthefreezer! I!(
section to pass to Milk Savor TM
The Milk Savor TM control is located
on the ieft wall of fresh food section
Control adjusts amount of air circulating in
Milk Savor TM Turn control clockwise for colder
temperature
To remove and install Milk Savor TM :
if located directly above Milk
Savor TM, dairy center or door _!
bucket may need to be removed t t I !]
Refer to appropriate thstrections I_i
and remove item Slide Milk Savor___ t
assembly up and pull straight out
To install, align one of the Ill
Mtik Savor" cold air intake _ll I\
holes (A) with one of the two ,._q],_B _.l
air inlets (B) in door liner A_::_I ]11]1ti1
Push assembly down onto "_1'1'1'1'1'1'1'1'1'1=_{]{I I1
door liner retainer until it steps _" _-_t'_Ht ]I 1
IMPORTANT: Milk Savor TM will not operate properfy if
air intake holes are not aligned with air inlet in door
liner
iii i ullllllllllll
Dairy Center
The dairy center provides convenient storage for items
such as butter, yogurt, cheese, etc..
This compartment is an adjustable feature located in
the door It can be moved to several different locations
to accommodate storage needs
To remove and install bin:
• To remove, slide dairy center up
and pull out _b_
• To install, slide assembly in
above desired door liner
retainer and push down until it
stops
To remove and install dairy door:
• To remove, press in sides of dairy door and pull out
• To install, slide sides of dairy door inside da}ry
center until hinge points snap into place
i
Refrigerator Features
Door Storage ,oatiaued
_Tilt-Out Door Buckets (some models)
The Tilt-Out Bucket assembly consists of a bucket and frame,
providing adjustable, convenient storage for food items in door
The bucket assembly lilts forward for easy access of items, and
lifts out for ease in deaNng and adjusting
To remove and install bucket:
To remove bucket, tip bucket forward
and putl straight out to remove
To install bucket, slide bucket into bucket
frame and push bucket upfighL
To adjust bucket frame:
Remove bucket per above instructions
• Lift frame of[ door support and place in
_. desired door location. ......
I Door Bucket; .........
Door buckets adjust to meet indMdual
storage needs
To remove and install buckets:
• L_ the door bucket up unti_it dears the
retainerson the door liner, then pull the door
bucket straight out
To install, slide bucket in above desired door
liner retainer and push down until bucket stops
M
Z
Shelves
Spillproof Shelves
Spitlpmof stationary shelves hold
simple spills for easier cleaning
To removeand install shelves:
To remove shek,es, lilt front of shelf to
release shelf hooks from metal track
and pull out to remove
• To install shelves, select point in metal track for replacement
and insert sheff hooks Raise front of shelf until hooks lock
into place Lower shelf fronL
Drawers
Rack (some models)
The Can rack slides out from
underneath the spi!tproof stationary
shelf. The can rack holds up to
tv_.elve 12-ounce beverage cans
To remove and install can rack:
To remove, empty contents of can rack Pull can rack
forward to full extension and lift front to release
from shelf rail. Pull straight out to remove
• To install, reverse above procedure.
t.
Snack Drawer
This drawer can be used for storage of
food items or exba produce
To remove and install snack drawer.
• To remove, pull drawer out to full
extension. Tilt up front of drawer and
pull straight ouL
• To install,reverse above procedure
I_ ii ilul I,IHIII
11