Kenmore 625.38461 Water Dispenser User Manual


 
12
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
Specifications
Troubleshooting
Problem: Taste and/or Odor.
Cause: Filter cartridges expended. Correction: Replace the filter cartridges. See Pages 10 & 11.
Cause: System contaminated. Correction: Sanitize system. Call 1-800-426-9345 for instructions.
Problem: Faucet LED indicator light does not function after battery change.
Cause: Battery dead. Correction: Replace with new battery. See Page 9.
Cause: Battery installed incorrectly.
.
Correction: Install battery correctly.
Problem: Water leaks at push connect fittings.
Cause:
Tubing not pushed in all the way.
Correction: Push Tubing all the way into fittings. See Page 8.
Cause: Tubing not cut square. Correction: Cut tubing square. See Page 8.
Cause: Tubing nicked. Correction:
Remove tube from connection. Remove nicked portion
by cutting tube to shorter length. Reinsert in connection
See Page 8.
Cause: Outer tubing surface not smooth. Correction:
Remove tube from connection. Remove problem area
by cutting tube to shorter length. Reinsert in connection
See Page 8.
Supply water pressure limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-100 psi (207-689 kPa)
Supply water temperature limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-100 °F (5-40 °C)
Inlet - Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8” Quick Connect fittings & tubing, included
This system conforms to NSF/ANSI 42 for the specific performance claims as verified and substantiated by test
data.
Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires instal-
lation be performed by a licensed plumber. Plumbing code 248--CMR of the Commonwealth of Massachusetts
must be followed in these cases.