Filter
Top Products
Repair
V. Repair
VA. Disassembly procedures
Use the following disassembly procedures to access parts such as fascia panels,
circulation pumps, heaters and controls.
To remove outer door
Tools needed: T20 Torx screwdriver.
1. Remove six T-20 Torx inner door screws below fascia panel -- three per
side (1).
2. Carefully pull bottom of outer door out from dishwasher until top door
tabs clear, then pull door down until it releases from dishwasher (2).
Take care to not scratch outer door.
TIP: 1-piece foam door guards don’t need to be removed from doors.
NOTE: Outer doors don’t need to be removed when dishwashers are flipped
upside-down or when fascia panels are removed, but can be if it makes
repairs easier.
To remove toe kick
Tools needed: Phillips screwdriver.
702_58300000149896_ara_en_b
1. Remove two Phillips screws and tilt toe kick out from dishwasher.