Filter
Top Products
Repair
To flip dishwasher upside-down
Tools needed: T20 Torx screwdriver, Phillips screwdriver and pliers.
1. Turn off water and electricity. Disconnect dishwasher mounting
brackets (1).
2. Remove toe kick by removing two Phillips screws and tilting toe kick
out from dishwasher (2).
3. Disconnect water line and electric supply (3).
4. Pull dishwasher out, place a pad or cardboard on the floor and carefully
flip the dishwasher upside-down (4).
5. Remove four base screws from front of dishwasher (5).
6. Remove two screws securing water valve to base. There’s no need to
disconnect valve wire harness or inlet hoses (6).
7. Pull wire harness connector from rear of terminal box (7).
8. Push latch on base-mounted control to disconnect it from base (8).
9. Remove both door springs from base (9).
10. Remove two tank screws from rear of dishwasher (10), disconnect both
rubber circulation pump supports (11) and carefully lift up base from
dishwasher (12).
702_58300000149896_ara_en_b