Kenmore 790.367 Range User Manual


 
Grounding instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directlyintoa properlygrounded receptacle. DO NOTcut or removethe
grounding prong from this plug.
Personal injuryor death from electrical shock may
occur if the range is not installed by a qualified installer or
electrician.
Grounding type
wall receptacle
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
_Avoid fire hazard or electrical shock.
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious
injury, fire or death.
This natural gas range is designed to allow for conversion
to Liquefied Petroleum (L.P.) Gas.
Only a qualified service agent should perform the L.P.
conversion. Call I=800=4=IVIY=HOME® if you wish to have
Sears Service perform the conversion. An L.P. Conversion
Kit is provided with this range and is located on the right
panel (right side) of the range. The kit contains installation
instructions which must be read before and followed
carefully when installing the kit.
To avoid serious injury, any additions,
changes or conversions required in order for this appliance /_
to satisfactorily meet the application needs must be made
by a qualified service agent.