Filter
Top Products
Setting Cooktop Controls
Minute Timer
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep
track of time from 1 to 99 minutes. The Alpha-Numeric display located to the left of the Timer UP/DOWN arrow key pads
will begin to count down minutes once set.
To Set the Minute Timer:
1. Touchthe@listedundertheword"TIMER". Touchingandreleasingthe@ortheQkeypadswill
increase or decrease the Minute Timer setting by 1 minute with each key press (up to 99 minutes).
2. Once the Timer Alpha-Numeric displays the desired amount of time, release the UP or DOWN Arrow key pads. The
MinuteTimer will begin the countdown with remaining minutes. The timer will display seconds coutdown for the last
minute. Once the Minute Timer reaches 00 a long beep will sound each minute and the timer Alpha-Numeric display
will flash "00" indicating that the time is up.
To Cancel the Minute Timer:
1. Touch the @ and Q key pads at the same time or touch and hold either the @ or Q key pad and scroll
to OO.
2. If cancelling the Minute Timer using the scrolling method, once the Main Control Alpha-Numeric display reaches 00,
release the Arrow key pad.
3. The set time will disappear from the LED indicating that the MinuteTimer is no longer active.
Locking the Controls
The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.
To Turn ON the Controls Lock Feature:
1. The Cooktop Lock will not activate until the cooktop isOFF. If the cooktop power is not OFF, touch and hold the
key pad until a beep sounds (about 1 second). The Power LED located above the _ key pad will
turn
OFF.
2. Touch the _ key pad until a beep sounds (about 5 seconds). The Lock LED above the (_ key pad will turn
ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 2, page 6)
To Turn OFF the Controls Lock Feature:
1. Touch the (_ key pad until a beep sounds (about 5 seconds). The Lock LED above the i_) key pad will turn
OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be used
(See Fig. 1, page 6).
2. If the cooktop is needed you must touch and hold the _ key pad until a beep sounds (about 1 second). The
key pad will turn ON. (See Fig. 4, page 6). You may now activate any
Power LED located above the of the
Cooking Zones.
11