Filter
Top Products
Induction Cooktop Display Messages
LED Messages or Light Indicators Displayed by Main Control
Fig. 1 Fig. 2
CONTROLS LOCK - This feature allows the cooktop to be locked only when the cooktop is
switched to OFF. Touch and hold the LOCK key pad for 5 seconds. A beep will sound and
the Lock LED will glow (Fig. 2). Once locked, no other displays will glow and no Cooking
Zones will activate. To turn the Controls Lock OFF, touch and hold the LOCK key pad for 5
seconds. A beep will sound, the Lock LED will turn OFF (Fig. 1) and the cooktop may be
used normally.
Fig. 3 Fig. 4
Fig. 5 Fig. 6
COOKTOP POWER - The Cooktop POWER key pad activates the entire Cooktop. To
power the cooktop, touch and hold the POWER key pad for 2 seconds. A beep will sound
and the Power LED will glow (See Fig. 4). The cooktop will be in a ready mode for 10
seconds. If no other key pads are touched the Cooktop Main POWER will turn OFF
automatically. To turn the Main Power OFF touch and hold the Main POWER key pad for 1
second. A beep will sound and the Power LED will turn OFF (See Fig. 3).
Error Codes Alpha-Numeric Display EOXX- The control displays E in Cooking Zone
Alpha-Numeric display (Fig. 5) and digits in Main Control LED (Fig. 6) together showing an
error code. For service call 1-800-4-MY-HOME® (See back cover of this manual).
Fig. 7 Fig. 8
Fig. 9 Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Alpha-Numeric Messages or LED Displayed by Cooking Zone Controls
COOKING ZONE ON/OFF PAD - Each of the Cooking Zones have separate ON/OFF key
pads. Once the Main Power key pad has been touched to activate the cooktop, touch the
corresponding Cooking Zone ON/OFF key pad once to activate the Cooking Zone needed.
"- -" will appear in the Alpha-Numeric display. If the corresponding UP/DOWN Arrow key
pad is not touched within 10 seconds, the request to turn the Cooking Zone ON will cancel
and the Cooktop will go back to ready mode. To set a Cooking Zone power level touch the
corresponding Cooking Zone UP or DOWN Arrow key pad once. The Cooking Zone ON/
OFF LED will glow (Fig. 8). To turn OFF a Cooking Zone, touch the Cooking Zone ON/OFF
key pad once. The Cooking Zone LED will turn OFF (Fig. 7).
POWER LEVEL SETTINGS - The Cooking Zones have separate Power Level Alpha-Numeric displays.
Once active, the Cooking Zones will provide 22 Power Levels to choose from. These include L0(Fig. 11),
2, 3, _, 5, 6, 7, B, 9; as well as precise .2 increment Cooking Zone Power Levels between/._ and 3 (Fig.
9); and half-increment power levels between 3 and "7(Fig. 12). The highest setting • P or "Power Boost"
provides 125% power for 10 minutes (See Fig. 10). Each key pad touch (or just holding down the Power
Level key pad) will scroll through all the available power levels for any Cooking Zone quickly.
RESIDUAL HEAT - Once any Cooking Zone has been used for cooking and turned OFF, and if the
cooktop surface temperature on any of the Cooking Zones is still too HOT, HE (See Fig. 13) will appear in
the Alpha-Numeric display for the affected Cooking Zone. The HE will continue to display if the tempera-
ture is still too HOT.
The Cooking Zones may appear to be cool while turned ON and after they have been
turned OFF. But the glass surface may be HOT from residual heat transferred from the cookware and
burns may occur if surface is touched.
KEEP WARM - Use the WARM key pad to activate the Warm setting for any of the Cooking Zones. The
ON/OFF key pad for the desired Cooking Zone must be activated first, then touch the WARM key pad
located in the Cooktop Main Control area once to set. LH (low heat) should appear in the corresponding
Cooking Zone Alpha-Numeric display (See Fig. 14).
PAN DETECTION - All five Cooking Zones will provide a Pan Detection message. If a Cooking Zone is
turned ON and no pan is detected, or the pan has been moved or is not centered correctly, or is not made
of magnetic material, power level will flash in the affected Cooking Zone Alpha-Numeric display.