Kenmore 790.4807 Oven User Manual


 
Setting the Oven Controls
Setting Preheat
Pre
The Heatpad controls the Preheat feature. The Preheat feature will bring the oven up to temperature
and then indicate when to place the food in the oven. Preheating is not necessary when
roasting or cooking casseroles. The oven can be programmed to preheat at any temperature
between 170°F to 550°F.
INSTRUCTIONS PRESS
To set the Preheat temperature for 350°F
1. Arrange the interior oven racks.
P.... 350" P_e
2. Press Heat. (the default oven temperature set) and "BAKE" Heat
will appear in the display (Fig. 1).
Press _T_. "BAKE" will appear in the display. "PRE" and the
actual oven temperature shown in the display will alternate as the
oven heats and reaches 350°F (Fig. 2).
3 @
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will sound a long beep, the "PRE" will
turn off: and oven temperature will be displayed (Fig. 3). When PRE
disappears from the display, the oven set temperature has been
reached. Once the oven has preheated, PLACE FOOD IN THE OVEN.
Press _ when baking is complete or to cancel the preheat feature.
@
DISPLAY
Fig. 1
Fig. 2
Fig. 3
To change Preheat temperature while avert is preheating
(example: changing from 350°F to 425°F)
If it is necessary to change the preheat temperature while the oven is
preheating to the original temperature:
Pre
1. While preheating, press Heatagain (Fig. 3)
2. Enter the new preheat temperature. Press 4 2 5. "425 °" will
appear in the display (Fig. 4).
3. Press STy. "PRE" wiJJ appear in the display as the oven heats to
425eF (Fig. 5). A long beep will sound once the oven temperature
reaches 425°F (Fig. 6).
4. When baking is complete press _.
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for a better heat
distribution.
425
@
@
Fig. 4
Fig. 5
Fig. 6
12