Filter
Top Products
Setting Oven Controls
Using and Setting Meat Probe
To use the meat probe:
1. Prepare the food and properly insert the temperature probe into the food. DO NOT PREHEATor start cooking before
properly inserting the meat probe. The probe should be inserted into the food and receptacle while the oven is still cool.
2. Place the prepared food on the desired oven rack position and slide into the oven.
3. Hug the meat probe into the probe receptacle located on the left front oven cavity side.
4. Close the oven door.
5. The oven control wiii detect if the meat probe is correctly plugged in and wiii illuminate with/_ icon in the display.
6. The actual meat probe temperature will appear in the display.
Meat
7. To set the target temperature press Probepad once then enter the desired the desired target internal temperature using the
numeric key pads (default setting is 1700F/770C) _. Press _ to accept the meat probe target temperature.
8. Set the oven control for W, _ or _ and the desired oven temperature. You may use the meat probe with some
other baking features but not be set with Broll or Fle×-Clean.
9. During the cooking process the actual meat probe temperature will be displayed.
Meat
10. If the target temperature needs to be changed during the cooking process_ press Probeand use the numeric keypads to
adjust the target temperature. Press the _ key to accept the change.
Seftlng the oven fo automaflcally stop cooking after reaching meat probe target temperature:
The oven leaves the factory preset to alert you when the internal target temperature has been reached and to continue with
the keep warm feature. You may desire to change how your oven reacts when using the meat probe.
Note: Changing how the meat probe reacts must be done before starting the cooking process.
1. To set oven to shut-off the baking function and continue in keep warm after reaching the Meat Probe target temperature
Meat Flex Q
press Probeand hold for 7 seconds then use the Cleankey toggle to the message CANCEL then press to accept.
Flex Q
2. Use the Cleankey to toggle back to COntlnU and then press to accept if you wish for the oven to continue cooking
after the meat probe reaches the target temperature.
22