Filter
Top Products
17
Oven Controls
To Start the Self-Clean Cycle
The Self-Clean key controls the self Clean feature. If you are
planning to use the oven directly after a self-clean cycle
remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour
self-clean cycle will actually take about 4 hours to complete. *It
is recommend to use a 2 hour self-clean cycle for light soils, a 3
hour cycle for average soils.
To avoid possible burns use care when opening
the oven door after the self-cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam to
escape.
Do not force the oven door open. This can damage the
automatic door locking system. Use caution and avoid possible
burns when opening the door after the self-cleaning cycle has
completed. The oven may still be very hot.
To start an immediate Self-Clean cycle or to set a Delay Start
time of 4:30 and shut-off automatically (example is a default 3
hour Self-Clean Cycle)
1. Be sure clock is set for correct time of day and door is
closed.
2. Press Self-Clean. CLEAN will flash and 3:00 HR will show in
the display. The oven will automatically clean for a 3 hour
period (default clean cycle). Note: if a 2 or 4 hour clean
time is desired, press 2 0 0 for 2 hour or 4 0 0 for a 4 hour
clean time.
3. Press . The DOOR LOCKED icon will flash; CLEAN
icon and the letters CLn will remain in the display.
4. As soon as the control is set, the motor driven oven door
lock will begin to close automatically. Once the door has
been locked the DOOR LOCKED indicator light will stop
flashing and remain on. Also, the oven icon will appear in
the display.
Note: Allow 15 seconds for the oven door to lock.
If a delay Self-Clean feature is desired, finish step 6-9.
5. Press Self-Clean. Dashes will appear in the display.
6. Enter the start time numbers 4 3 0 and press . CLEAN,
DELAY, LOCK, and DOOR will be displayed.
7. The control will start the self-cleaning at the set start time,
for the period of time previously selected. At that time, the
icon DELAY will go out.
When the self-clean cycle is completed:
8. HOT will appear in the display. The time of day, the DOOR
LOCKED and CLEAN icon will remain in the display.
9. Once the oven has cooled down for approximately 1 HOUR,
and the DOOR LOCKED icon is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press .
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the DOOR
LOCKED icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the
Delayed Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delayed Self-Clean Cycle 12-24
hours in advance set the control for the 24 hour time of day
display mode.