Kenmore 790.495 Oven User Manual


 
14
Oven Controls
Setting Conv Roast
The Conv Roast function combines a cook cycle with the convec-
tion fan to roast meats and poultry. Meats cooked using the
Conv Roast function will be juicier and poultry will be crisp on
the outside while staying tender and moist on the inside.
Conv Roast may be set for any oven temperature between
170°F (77°C) to 550°F (288°C).
Suggestions for Conv Roast:
Preheating is not necessary when roasting foods using Conv
Roast. Since Conv Roast cooks food faster, reduce the cook
time by 25% from the recommended cook time of your
recipe. If necessary, increase cooking time until the desired
doneness is obtained.
The broiler pan will catch grease drippings, and the grid
will help prevent splatters. The roasting rack will hold the
meat. Use the offset rack on rack position 1.
Do not cover foods when dry roasting as this will prevent
the meat from browning properly.
To set Conv Roast with a default oven set temperature of 350°F:
1. Press Conv Roast.
2. Press .
To cancel Conv Roast at any time press .
Important note:
The convection fan will begin rotating once Conv Bake,
Conv Roast or Conv Convert has been activated.
If the oven door is opened when any convection function is
active, the convection fan will stop rotating until the oven
door is closed.
It is not recommended to roast chicken on a roasting rack.
Use a deep pan instead.
Setting Conv Convert
Pressing the Conv Convert key automatically converts the
cooking temperature entered for any standard baking recipe to
the lower temperature required for convection baking.
When Conv Convert is used with a timed Conv Bake setting of
20 minutes or more, the Conv Convert function will display a CF
message (Figure 14) as a reminder to check food when the bake
time is 75% complete. At this time the oven control will sound 1
long beep at regular intervals until the set cook time has
finished.
To add Conv Convert to Conv Bake function using default oven
set temperature of 350°F:
1. Press Conv Bake.
2. Press Conv Convert.
To cancel Conv Convert at any time press .
To program oven for Conv Convert with oven default tempera-
ture of 350°F and to shut-off after 30 minutes:
1. Press Conv Bake.
2. Press to accept.
3. Press Cook Time.
4. Enter 3 0 using numeric keypads.
5. Press to accept.
6. Press Conv Convert.
To cancel Conv Convert at any time press .
To program oven for Conv Convert with recipe temperature of
425°F and to shut-off after 30 minutes:
1. Press Conv Bake.
2. Enter 4 2 5 using numeric keypad.
3. Press to accept.
4. Press Cook Time.
5. Enter 3 0 using numeric keypads.
6. Press to accept.
7. Press Conv Convert. Set bake temperature will convert to a
lower temperature and begin baking process.
To cancel Conv Convert at any time press .
Important note:
Conv Convert may only be used with the Conv Bake function
and with a minimum of 20 minutes cook time.
When using Conv Convert feature Cook Time reductions
may vary depending on the oven set temperature.
The convection fan will begin rotating once Conv Bake,
Conv Roast or Conv Convert has been activated.
If the oven door is opened when any convection function is
active, the convection fan will stop rotating until the oven
door is closed.
Figure 14: Check Food reminder shown in display.