Filter
Top Products
Consumer
Defined Control START
Feat ure s
FEATURE CLOCK
OVERVIEW
Silent Control TS_
Operation
_llEN
TIMEn
0N/0FF
Setting Silent Control Operation
The STOP TIME @ and CLEAN (_ pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold @ for 7 seconds. "DELAY" will appear and flash
in the display (Fig. 1). If ":SP" appears (Fig. 2), the control will
operate with normal sounds and beeps. If":- -" appears (Fig.3),
the control is in the silent operation mode.
2. Press _ to switch between normal sound operation and
silent operation mode. The display wilt show either ":SP" (Fig. 2)
or ":--" (Fig. 3).
for 7seconds
4. Press _ to accept the change or press _ to reject the
change.
Figure 1
Figure 2
Figure 3
19