Filter
Top Products
ENSURING PROPER AiR CiRCULATiON PRIOR TO USE
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections.
, Cool air enters the freezer through the vents located at
the top of the compartment and exits through the vents
located behind the freezer drawers.
, Cool air from the freezer section enters the fresh food
section through vents located at the top of the
compartment. The air moves down throughout the
compartment and exits through the vents located behind
the crisper drawers.
1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold air in
the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
CONTROL PANEL FEATURES
REFRIGERATOR AND FREEZER CONTROLS
" Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
iMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors.
To prevent odor transfer and dried out food, wrap or cover
foods tightly. (See the Food Storage Guide section for
details.)
NOTE: If you
close the
refrigerator door,
you may see the
freezer door
open and close
again due to
pressure from
internal air flow.
It is recommended to mantain the temperature of 37°F
(3°C) in the refrigerator compartment and 0°F (-18°C)in
the freezer compartment. To adjust temperatures, press
Refrigerator Temp graphic and Freezer Temp graphic.
The lower the number, the colder the compartment will be.
NOTE: The refrigerator temperature can be modified from
33°F to 46°F (0°C to 8°C). The freezer temperature
can be modified from =6°F to 8°F (=21°C to =13°C).
To change temperature unit from Fahrenheit to Celsius
or from Celsius to Fahrenheit press and hold Fridge Temp
and Freezer Temp buttons.
Display Off Mode
, When the refrigerator is in the Display Off Mode, the
display will remain off until a door is opened or a button
is pressed. Once on, the display will remain on for 20
seconds.
, To deactivate the Display Off Mode, press and hold the
Freezer Temp and Ultra Ice buttons for 5 seconds until
the tone sounds. Repeat this procedure to reactivate the
Display Off Mode.
16