Filter
Top Products
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn off
power at the circuit breaker or fuse box. Failure to do so
could result in death or serious injury.
Remove food and any Adjustable Door or Utility Bins from
doors. Failure to do so could result in serious injury.
Remove washer and set aside.
Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove
screws. Set Middle Hinge Bracket and other parts
aside.
(For Freezer Drawer Models)
If entrance is less than 35-inches wide, the refrigerator door
and freezer drawer will need to be removed.
TOOLS NEEDED:
• 10mm or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
° No. 2 Phillips head screwdriver
• Flat-head screwdriver for prying
• Adjustable wrench
Before removing the doors, remove the Base Grille.
See BASE GRILLE INSTALLATION for reference.
HOW TO REMOVE REFRIGERATOR DOOR
Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove.
J
Fig. 1 ____
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 2
Top Hinge
HOW TO REMOVE PULL OUT DRAWER
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to perform
the following instructions.
• Pull the drawer open to full lower extension. Remove
durabase by lifting it from rail system.
Fig. 5
Durabase
• Press both hangers with your thumbs to lift it up.
Fig. 6
Lift up door slightly and remove it. Place door on
a non scratching surface.
Fig. 3
Middle Hinge
10
• Separate the left and right rail cover
Fig. 7