HOW TO INSTALL PULL OUT DRAWER
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to perform
the following instructions.
• With both hands, hold the center of the bar and pull it
out to let both rails out to full extension simultaneously.
• Hook door supports into rail tabs.
Fig. 1._ipp°rts _
• Align the top holes of the rail cover with the top holes
of the door supports to assemble the rail cover.
Fig. 21
• Verify the hole's alignment.
Fig. 22 _,_
• Lower door into final position and tighten the screws.
Fig. 19
Screws
• Make sure you have the correct rail cover for each side.
Right
Rail cover
Fig. 23
• With the rails pulled out to full extension, insert the
Durabase drawer in the rail assembly.
Fig. 24
Durabase
[] WARNING: To prevent accidental child and pet
entrapment or suffocation risk, DO NOT allow them to
play inside of drawer.
[] WARNING: DO NOT step or sit down on Freezer Door.
12