Filter
Top Products
Place freezer door down on Bottom Hinge Pin.
Bottom Hinge '_
Fig. 52
• Reattach Middle Hinge Pin. Replace washer.
REMOVING,REVERSING AND REPLACING
REFRIGERATOR DOORS
(For Freezer Swing Models)
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury.
Remove food and any Adjustable Door or Utility Bins
from doors. Failure to do so could result in serious
injury.
Pin
• Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 54
Middle Hinge
• Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 55
Top Hinge
You may find it more convenient to have the doors
converted from the left-opening type (factory installed)
to the right-opening type. Directions refer to the right
side as the side on your right as you face the unit.
TOOLS NEEDED
• 10mm or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• 1/4inch socket wrench
• Flat-head screwdriver for prying
• Adjustable wrench
• Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove.
Fig. 57
• Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 58
Top Hinge
• Tighten Bolts. Force-fit Top Hinge Cover over top
Hinge.
Fig. 56
17
• Lift up refrigerator door slightly and remove it.
Fig. 59
Middle Hin(