Kenmore 795.7130-K Refrigerator User Manual


 
HOW TO REMOVE AND INSTALL THE
PULL OUT DRAWER
1. Removing Pull out Drawer
IMPORTANT: To avoid possible injury, product or
property damage, you will need two persons to perform
the following instructions.
Pull the drawer open to full lower extension. Remove
the durabase by lifting it from rail system.
Fig. 1 _._ I
_ Durabase__
Press both hangers with yours thumbs to lift it up.
Fig. 2
Separate the left and right rail cover
Fig. 3
Remove the screws of the rail on both sides.
Fig. 4
screw
[]
CAUTION: When removing drawer door, do not hold it
by the handle. The door could fall down and you may
be injured. Grasp the door with both hands as pictured
below when removing.
[] CAUTION: When laying down the drawer, be careful
not to damage the floor or hurt your feet with the sharp
edges on hinge side.
With both hands, hold both sides of the door and pull it
up to separate it from the rails.
Fig. 5
Fig. 6
_R D°°r
supports
ail tabes
'h
° Push the rails back into drawer cavity. With both
hands, hold the center of the bar and push it in so
that both rails go back simultaneously.
Fig. 7
Fig. 8
12