Filter
Top Products
HOW TO REMOVE AND INSTALL THE
PULL OUT DRAWER (cont.)
2. Installing Pull out Drawer
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to perform
the following instructions•
• With both hands, hold the center of the bar and pull it
out to let both rails out to full extension simultaneously.
° Hook door supports into rail tabs.
F" .^ Door Supports_,'_,%
,0,o
° Align the top holes of the rail cover with the top holes
of the door supports to assemble the rail cover•
Fig. 13
Verify the hole's assembly
Fig. 14
° Lower door into final position and tighten the screws.
Fig. 11._
Make sure you have the correct rail cover for each side.
_ Right
__ail cover
RaiLlecftver <'" _'_"_ _"'1_
Fig. 12 _ V
13
Fig. 15
° With the rails pulled out to full extension, insert the
durabase in the rail assembly.
Fig. 16
[] WARNING: To prevent accidental child and pet
entrapment or suffocation risk, DO NOT allow
them to play inside of drawer•
[] WARNING: DO NOT step or sit down on Freezer
Drawer•