Filter
Top Products
- 54 -
8-2 DOOR
● Door Gasket Removal
1. Remove door frame cover
Starting at the top of cover and working down,
snap the cover out and away from the door.
2. Remove gasket bracket clips
There are two clips on each door. Start the bracket
removal near one of the middle clips.
1) Pull the gasket back to expose the gasket bracket clip
and door frame.
2) Insert a flat tip screwdriver into the seam between the
gasket bracket and the door frame and pry back until
the clips snap out.
3) Continue prying back along the seam until all clips
snap out.
3. Remove gasket
Pull the gasket free from
gasket channel on the three
remaining sides of door.
● Door Gasket Replacement
1. Insert gasket bracket clips
1) Insert the gasket bracket edge beneath the door
frame edge.
2) Turn the upper gasket bracket spring so that the
spring ends are in the door channel.
3) Push in the clip until you hear it snap securely into
place.
4) Push in the remaining clip until you hear it snap
securely into place.
Note: Make sure that no part of the gasket bracket edge
protrudes from beneath the door frame edge.
2. Insert gasket into channel
1) Snap the gasket assembly into the door bracket.
Inserting the Gasket Assembly into the Bracket Door
Frame Cover
Handle
Door
Frame
Gasket
Bracket Clip
Flat Tip
Screwdriver
Gasket
Bracket
Figure 1
Figure 2
Figure 3
Door
Frame
Gasket
Bracket Clip
Spring
IncorrectCorrect
Incorrect
Correct
Figure 4
Figure 5