Kenmore SF22-804 Double Oven User Manual


  Open as PDF
of 6
 
Date: 12/28/07
Parts& RepaLrServices
SF22-804
Page 3 of 6
3. Position the new switch as shown in the
photo. The new switch is held in place by a
single screw on one end and the tab from
the mounting bracket on the other end.
4. Secure the switch with the long screw and
speed nut.
DO NOT OVER TIGHTEN SCREW.
5. Reinstall the lock motor onto the bracket.
Make sure that the cam on the motor is
pressing the plunger of the new switch.
6. Re install the lock motor assembly onto
the chassis. Take care to ensure the
latch rod is properly inserted into the
motor couplinc].
Confidential Information -For Internal Use Only
DEPARTMENT 702HSX - Leo Steinys
DEPARTMENT 702PSO - Bob Vondale
 previous next