Filter
Top Products
Date: 12/28/07
Parts& RepaLrServices
SF22-804
Page 5 of 6
11. Use the wire nut connector provided to
connect the power wire that was attached to
the 170 ° thermostat to the #1 wire from the
"C" terminal of the new switch.
12. Install the #2 (318052585 - Red) wire
from the "NC" terminal of the new switch to
the open terminal of the 170 ° thermostat that
the power wire previously attached to.
new switch
13. Disconnect the wire from the fan to
the 170 ° thermostat. Connect this
wire to the piggyback terminal on the
#3 (318052585 - Red) wire. Connect
these two wires onto the open
terminal of the 170 ° thermostat.
14. Connect the other end of the red #3
wire to the resistor. Connect the #4
(318052586-Brown) wire to one
terminal of the 120 ° thermostat.
Connect the other end to the
resistor.
Confidential Information -For Internal Use Only
DEPARTMENT 702HSX - Leo Steinys
DEPARTMENT 702PSO - Bob Vondale