Filter
Top Products
●
T
his appliance conforms to EC
directive 2004/108/EC on
E
lectromagnetic Compatibility and
E
C regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
Wash the parts: see ‘cleaning’.
key
ቢ speed selector
ባ power unit
ቤ cord grip
ብ cover
ቦ upper knife blade
ቧ finger grip
ቨ lower knife blade
ቩ bowl
ቪ locating pin
ቫ bowl base
ቭ mayonnaise dripper (if supplied)
to use your food
chopper
The knife blade unit comes in 2
parts, a lower and an upper blade.
●
For coarser chopping use the lower
blade on its own.
●
For finer chopping or pureeing use
both blades together. This will also
give a faster result. To use both
blades fit the upper blade onto the
lower blade and turn anti-clockwise
to locate in place ᕡ. Take care as
the blades are sharp.
Note: After processing food, the
upper blade may disengage from the
lower blade. This is normal as the
blade assembly is designed to be
loose fitting to ease separation after
use.
1 Put the bowl base on the bottom of
the bowl. (This stops the bowl sliding
on the work top).
2 Place the unit on a clean, flat
surface.
3 Fit the desired knife blade assembly
into the bowl over the locating pin
ᕢ.
4
Cut the food into suitably sized
pieces and place in the bowl. Larger
p
ieces of food should be cut into
a
pproximately 1 to 2 cm pieces.
5 Fit the cover and turn clockwise to
lock into place ᕣ.
6 Place the power unit onto the cover.
7 Connect to the power supply and
press down on the speed selector to
select the desired speed. When
operating the power unit, hold it
firmly on the cover and bowl.
●
Press the speed selector lightly to
obtain speed 1.
●
Press the speed selector firmly to
obtain speed 2.
●
Alternatively the speed selector may
be pressed down for short periods
of time to produce a pulsing action.
This can be used to avoid over
processing food.
8 Operate the food chopper until the
desired result is achieved.
9 Switch off and unplug after use.
10Reverse the above procedure to
dismantle the unit.
important
●
If preparing food for babies or young
children, always check that the
ingredients are thoroughly blended
before feeding.
●
Do not run the food chopper
continuously for longer than 10
seconds. Leave to cool for 1 minute
in between each 10 second
operation.
●
Do not operate the food chopper if
the bowl is empty.
●
Never operate the food chopper with
the bowl filled with liquid.
●
Always allow hot food to cool before
processing.
3