Kenwood FP582 Food Processor User Manual


 
h
ints
Use fresh ingredients
Don’t cut food too small. Fill the width of the large feed tube
f
airly full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
When using the chipper disc, place ingredients horizontally.
W
hen slicing or shredding: food placed upright comes out
shorter than food placed horizontally .
There will always be a small amount of waste on the plate or in
t
he bowl after processing.
k citrus press
Use the citrus press to
squeeze the juice from citrus
fruits (eg oranges, lemons,
limes and grapefruits).
cone
sieve
to use the citrus
press
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly
over the bowl handle .
3 Place the cone over the drive
shaft turning until it drops all the way down .
4 Cut the fruit in half. Then switch on and press the fruit onto the
cone.
The citrus press will not operate if the sieve is not
locked correctly.
k mill
U
se the mill for milling herbs, nuts and coffee
b
eans.
blade unit
sealing ring
jar
sprinkler lid
safety
Never fit the blade unit to your machine
without the jar fitted.
N
ever unscrew the jar while the multi-mill
is fitted to your machine.
Don’t touch the sharp blades. Keep the blade
u
nit away from children.
Never remove the multi-mill until the blades
have completely stopped.
important
To ensure long life of your mill, never run for
longer than 30 seconds. Switch off as soon as
you’ve got the right consistency.
Don’t process spices - they may damage the
plastic.
The machine won’t work if the mill is fitted
incorrectly.
Use for dry ingredients only.
to use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock (see “to use
your liquidiser”).
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
The sprinkler lid is not airtight.
hints
Herbs are best milled when clean and dry.
5
P
8
1
2
3
4
5
6
7
0
P
8
1
2
3
4
5
6
7
0
k
f
k
g
k
f
k
g
P
8
1
2
3
4
5
6
7
0
k
h
k
i
23
k
h
k
i
24