Kenwood KM200 Mixer User Manual


 
Mixer Controls
To select a speed simply turn the control to the desired number.
Note
If your speed control is fitted with 'pulse', turn to this position for a quick burst of power.
The pulse will operate for as long as it is held in position.
Important
Overload Protection (WHEN FITTED)
If your mixer is fitted with an overload protection device, it will stop
automatically if overloaded. If this happens switch off, raise the mixer
head to expose the green button. Allow the mixer to stand for a few
minutes then press the button so mixing can continue.
continue.
Care
The bowl, whisk, 'K' beater and dough hook may be washed in sudsy
water. Your mixer needs only to be wiped over with a damp cloth.
Always switch off and remove plug from power supply. Never use
abrasives and never put the machine in water. After initial use a small
amount of grease may appear at the outlets 2 and 4 (see page 2) after
running in. This may be wiped away and will not effect the performance
of your machine.
Note
Do not allow the bowl to be
exposed to direct heat
(ie do not dry over a cooker or
in the oven).
Do not use the bowl in the
microwave.
Service
In the event of failure contact
your local distributor for
assistance.
Use
of
attachments
Keep hands clear of rotating
cutting blades.
Do not use more than one
attachment at a time.