Filter
Top Products
N
ote:
●
For non-rewireable plugs the fuse
c
over MUST be refitted when
r
eplacing the fuse. If the fuse cover is
lost then the plug must not be used
u
ntil a replacement can be obtained.
T
he correct fuse cover is identified by
colour and a replacement may be
o
btained from your Kenwood
A
uthorised Repairer (see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
●
Wash the parts: see ‘cleaning’.
key
ቢ stirrer
ባ cap
ቤ lid
ብ goblet
ቦ sealing ring
ቧ blade assembly
ቨ power unit
ቩ tap assembly
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 Screw the goblet onto the blade
assembly.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position ᕡ.
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
●
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS.
6
Add ice or frozen ingredients to the
goblet.
●
T
his includes frozen fruit, frozen
y
oghurt, ice cream or ice. These can
be added up to the level marked
F
ROZEN INGREDIENTS.
7
Screw the lid onto the goblet.
8 Either put the cap into the lid, then
t
urn. Or place the stirrer in the hole.
●
T
he stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
used.
9 Press the MIX button for up to 30
seconds, this is to start the mixing
process, then press the SMOOTH
button. Allow the ingredients to
blend until smooth.
●
Use the stirrer by moving it in an anti
clockwise direction.
10 Place a glass underneath the tap,
press the MIX button and press
down on the dispensing tap lever.
●
Thinner drinks may dispense without
having to switch on the power unit.
●
Use the stirrer to assist when
dispensing thick smoothie drinks.
●
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
●
When the glass is full, switch off and
release the lever.
OR
Switch off, remove the goblet and
pour the drink.
hints
●
To make a thinner smoothie drink
add more liquid.
●
To make a thicker smoothie drink
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
●
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
●
Use the PULSE button to operate
the power unit in a start stop action
to control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
3