Filter
Top Products
12 13
ADDING WATER TO THE WATER RESERVOIR
The Add Water Light will fl ash indicating the Water Reservoir
is out of water. Fill Water Reservoir with fi ltered or bottled
water to the MAX FILL line. Once Water Reservoir is placed
back on the Brewer, press the Brew•Off Button to begin
the brewing process. The fi rst brew after refi lling the Water
Reservoir will be longer than average because more water
needs to be heated up before brewing. Subsequent brews
will be shorter as long as the Water Reservoir remains fi lled.
NOTE: Pressing the Brew•Off Button is not needed if you refi ll
the Water Reservoir before the Add Water Light fl ashes.
AUTO OFF TIMER FEATURE
This Brewer is equiped with an auto-off timer feature that
will turn off the Brewer after 2 hours of non-use. NOTE: The
Brewer’s auto-off timer comes deactivated from the factory.
Follow the below steps to activate or deactivate the auto-off
timer.
1. To activate the auto-off timer, hold down the Serving Size
Button and Brew•Off Button together for 5 seconds. The
Serving Size Indicators and Brew•Off Button will fl ash 2
times indicating the auto-off timer is activated.
2. To deactivate the auto-off timer, hold down the Serving
Size Button and Brew•Off Button together for 5 seconds.
The Serving Size Indicators and Brew•Off Button will fl ash 5
times indicating the auto-off timer is de-activated.
CONTROL PANEL INDICATOR LIGHTS
Indicator Reason
Brew•Off
Button
Flashing
Indicates Brew Head is open
or water is needed
Pulsing Indicates Brewer is brewing
Steady on Ready to brew
6
8
10
oz.
Brew•Off
Button
+
Serving
Size
Indicators
Flashes 2
times
Indicates the auto-off
timer feature is activated.
See page 12 for further
instructions.
Flashes 5
times
Indicates the auto-off timer
feature is de-activated.
See page 12 for further
instructions.
6
8
10
oz.
Serving
Size
Indicators
Flashing
Indicates Brewer needs to
be de-scaled. See de-scale
instructions on page 16.
Add Water
Light
Flashing
Indicates the Water Reservoir
is out of water. When Water
Reservoir is refi lled, press the
Brew●Off Button to resume
or start brewing.
Pre-
Heating
Light
Flashing
Indicates water in the
internal reservoir in heating
to prepare for your next
brew. The light will go off
indicating that the water
has reached the correct
temperature to brew.