Filter
Top Products
13
4. To replace the Funnel, just snap it back into the K-Cup Holder (fig. 4).
5. To replace the K-Cup Holder Assembly, align the K-Cup Holder with
the opening using the two front ribs as a guide and snap into place
from the top (fig. 5).
2. Separate the Funnel from the K-Cup Holder by pulling it until it snaps
free (fig. 2).
3. Clean the Exit Needle on the bottom of the K-Cup Holder. Insert a paper
clip (fig. 3) or similar tool from below if needle becomes clogged by
coffee grinds.
fig.
3
fig.
2
fig.
4
fig.
5
Avoid sharp needles in K-Cup
®
Portion Pack Assembly Housing.
Do not put your fingers inside the
K-Cup Assembly Housing.