Filter
Top Products
17
Brewer may be cold or frozen. Let Brewer rest at room temperature for at least 2 •
hours before powering on.
Make sure the Brewer has power (see previous page).•
Allow enough time for water in the Cold Water Reservoir to drain completely into the Brewer. •
The Exit Needle may be clogged (see page 12).•
Clean the K-Cup•
®
Portion Pack Assembly if necessary (see page 12).
De-scale the Brewer (see page 14).•
If you have repeated the de-scale procedure two times and the Brewer still does not •
function properly, contact Customer Service.
• Under normal operation, the Brewer will shut off when it is idle for longer than 90 seconds.
Just press the Power Button to restart.
If the Brewer shuts off in the middle of a brew (not from power outage), contact Customer Service.•
• Remember that any liquid overflow (from your cup or the Cold Water Reservoir) will be
caught in the Drip Tray.
When the Drip Tray is almost full, the red Drip Tray Overflow Indicator will appear. Carefully •
remove the Drip Tray and empty its contents into the sink.
• This means that the Drip Tray is almost full. Carefully remove the Drip Tray and empty its
contents into the sink.
SITUATION SOLUTION
Brewer shuts off automatically
Brewer only brews a partial brew
Brewer will not brew when used for the first time
There is water in the Drip Tray
Red Indicator appears in Drip Tray
Should other issues arise with your Brewer, please call
Keurig
®
Customer Service at 1.866.901.BREW (2739).