Keurig SS-700 Coffeemaker User Manual


 
15
Programming
Setting the Clock
Setting the clock is optional. When the clock
is set, the time will appear on the control
panel. Note: You must set the clock if you
plan on using the ONOFF TIME SET
programming feature.
1. Press the Menu button. Programming
options will appear on the control panel
with CLOCK flashing. The word OFF will
appear at the top of the control panel
to indicate that the clock is not set (see
figure 17).
2. Press or hold the
button to scroll
through the hours until you have
reached the appropriate hour. Be sure
the PM indicator is on if a PM time is
desired.
3. Press or hold the
button to scroll
through the minutes until you have
reached the desired minutes.
4. When you have reached the correct
time, press the Menu button to set the
time. Continue pressing Menu to scroll
through the remaining programming
functions to exit the programming
mode.
5. The correct time should now be
displayed on top of the control panel
(see figure 18).
Note: Depending upon the Brewer’s
current mode, other icons will be
displayed as well.
Note: If power is interrupted to the Brewer,
the clock will need to be reset. Follow the
procedure above to reset the clock.
Programming On/Off Features
The Brewer provides three ways for you to
enjoy gourmet coffee, tea or hot cocoa on
your own schedule. It will take the Brewer
approximately 3½ minutes to warm up from
room temperature.
1. Leave it on all the time.
The Brewer can be left on all the time so
that it is always ready to brew a fresh
cup of gourmet coffee, tea or hot
cocoa.
To turn the Brewer off at any time,
simply press the power switch located
on the right side of the Brewer.
Note: Although the clock remains on, if
set, you cannot brew a cup of coffee,
tea or hot cocoa if the brewer is off.
Press the power switch to restore
power to the Brewer. You will have to
wait for the water to heat up before the
Brewer is ready to brew.
Set Hours
Set Minutes
figure 17
Clock set in READY Mode
figure 18