Filter
Top Products
O}
Ill
It is the customer's responsibility:.
To contact a qualified electrician.
Toassure thatthe electrical installation is adequate and in
conformancewith all national andlocal codes and
ordinances.
Dishwashermust be connectedtotheproperelectricalvoltageand
flequencyasspecifiedonthemodel/serialratingplate.Themodel/serial
ratingplateis locatedbehindthedoor on thefrontframeofthe
dishwasheropening.
• CONNECTWITHCOPPERWIREONLY.
• 120-volt,60-Hz,AC-unly,15-ampere, fused electrical supply is
required.
• Atime-delayfuse or circuit breaker isrecommended.
• It is recommended thata separate circuit servingonlythisappliance
be provided.
• Some models are already equipped with a power supplycord. If a
power supply cord isnot supplied, Power Supply CordKit (Part No.
4317824) isavailable from your local dealer or parts supplier. Follow
the kit instructions for installing power supply cord.
Ifthe kitis not available locally, use a U.L-listed/CA*_-certified,three-
conductor, 16-gauge, six foot, power supply cord thatmeets alllocal
codes and ordinances. It must be routed so itdoes not touch the
dishwashermotor or lower portion ofthe dishwasher tub. Aswain
reliefmust be used to secure the power supply cord to the dishwasher
terminalbox. Thepower supply cord must be plugged into a mating
3-prong, ground-type oudet, grounded in accordance with allnational
and local codes and ordinances.
• Ifapowersupplycord is attachedtodishwasherbutyouneed to direct
wiredishwasher,youwillneedDirectWireConnectionKit(PartNo.
4317979). Removepowersupplycordand makealldirectwire
connectionsinsideterminalbox. Allelectricalconnectionsmustbe
madein accordancewithallnationaland localcodesandordinances.
• Dishwashermustbeconnectedtoagroundedmetal,permanent
wiringsystemor a groundconductorcan beusedwiththedt_-'uit
conductorsto connectto thegroundterminalor leadonthe
dishwasher.
• Do notgroundto a gaspipe.
• Do notconnectdishwashertoelectricalsupplyuntildishwasheris
permanentlygrounded.
• Donothaveafusein theneutralor groundcircuit.