Filter
Top Products
10
2. From the underside of the hood, plug control cables together
as shown.
3. Insert each connected cable into a black plastic connector
box half.
4. Place the top half of the connector box on each and screw
the two halves together using the four screws provided for
each connector box.
5. Using the two longer screws provided for each box, attach
the assembled connector boxes to the metal flange.
Complete Installation
1. For recirculating installations only, install charcoal filter from
Recirculating Chimney Kit behind the center grease filter by
inserting and locking it in place.
3. Slide the chimney cover provided with the extension kit over
the lower chimney support and extension frame and secure to
the top of the extension frame using the two screws provided.
4. Slide lower chimney cover over the chimney support and
extension chimney cover and attach to the bottom of the
support using the two screws provided.
Install Range Hood
1. Lift the hood up against the chimney support and attach to
the support with 4 bolts provided. Tighten bolts securely.
A. Screws
B. Connector box half
A
B
B
A. Screw
B. Upper chimney extension cover
C. Lower chimney cover
B
A
C
A
A
A
B
C
A. Chimney extension kit assembled to hood
assembly with chimney covers attached
A. Chimney support
B. Hood
C. Bolts