Filter
Top Products
ENGLISH
5
Blade Coffee Grinder Operating Instructions
Before First Use
1. Wash bowl and
top cover in hot,
soapy water. Rinse
and dry. Blade is
sharp. Handle the
blade carefully.
Bowl and top
cover can also be
washed in the
dishwasher (top
rack only).
Blade Coffee Grinder Use
1. Unplug Coffee Grinder.
2. Check that inside of top cover is free of
coffee grinds or residue.
3. Secure the bowl to the motor housing
by placing the bowl on top and
turning clockwise to lock in place.
4. Place whole coffee beans in the bowl
to be processed. Fill the bowl to no
more than the Maximum Fill line
marked on the inside of the bowl as
recommended by KitchenAid. Various
bean blends and bean sizes can cause
differences in fill levels/grind times.
Generic markings inside the bowl
will help you adjust the amount of
grounds to your liking.
5. Position Top Cover over bowl so that it
slides over the side guides on the motor
housing.
NOTE: Make sure both cover and bowl are
in position, otherwise the Coffee Grinder
will not operate.
6. Plug power cord into electrical outlet.
7. Press down Top
Cover to start
processing. (For
optimum grinding
results, do not pulse
top cover.) Continue
grinding until all the
beans are ground
to the consistency
you want, or follow
Suggested Grinding
Chart for automatic drip coffee makers
and french press machines (page 6).
NOTE: Do not operate the grinder for
longer than 25 seconds.
8. To stop processing, release pressure on
Top Cover.
9. Unplug the
appliance.
10. Wait until the blade
has stopped rotating
and remove Top
Cover.
11.Unlock bowl
by turning it
counterclockwise.
Remove bowl from
the motor housing.
12. Pour out ground
coffee.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.