Filter
Top Products
7
ENGLISH
Troubleshooting
• If your Coffee Grinder should fail to
operate, check the following:
– Check that both bowl and top cover are
properly locked on base.
– Check that the Coffee Grinder is plugged
into a proper electrical outlet. If it is,
unplug the Coffee Grinder. Plug it back
in to the same outlet. If the Coffee
Grinder still does not work, check the
fuse or circuit breaker on the electrical
circuit the Coffee Grinder is connected
to and make sure the circuit is closed.
If the problem cannot be fixed contact
KitchenAid or an Authorized Service
Center.
USA/Puerto Rico: 1-800-541-6390,
Canada: 1-800-807-6777,
Mexico: 01-800-024-17-17
(JV Distribuciones)
or
01-800-902-31-00
(Industrias Birtman)
See the KitchenAid Warranty and Service
section on page 8 for additional details.
Do not return the Coffee Grinder to the
retailer – they do not provide service.
Cleaning the Blade Coffee Grinder
1. Always unplug Coffee Grinder before
cleaning.
2. Remove the bowl and top cover. Wash
in hot, soapy water, rinse and dry. Bowl
and top cover can also be washed in
the dishwasher (top rack only). After
removing from dishwasher, allow to
cool before assembling.
3. Wipe the motor housing clean with a
damp, soft cloth. Do not use abrasive
cleaners. Do not immerse the motor
housing in water.
4. Wipe cord with warm, sudsy cloth;
then wipe clean with damp cloth. Dry
with soft cloth.
5. Reassemble your Coffee Grinder after
cleaning.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.