Filter
Top Products
-.
I’
DETAILS AND CONNECTIONS
CAUTION
For in&liation when the dishwasher is to be left
unused in freezing temperatures: Turn off electrical
power and shut off water supply at the hand valve.
Remove lower panel. Disconnect both inlet and outlet
lines at the DRAIN valve. This permik water to drain
from the dishwasher tank, pump and drain line.
Disconnect both the inlet and outlet lines at the FILL
valve. Make provisions to control water drained
from unit. Reinstall lower panel. Turn on electrical
power. Then, push door handle down to lock position
and
push
“Normal Cycle” button. Let dishwasher run
through first pm-rinse only (approximately four min-
utes) to drain all water trapped in the dishwasher. Turn
off electricity. To complete installation later:
Connect drain and fill valves-both inlet
and outlet.
Reinstall lower panel.
Turn on water and electrical supply. Then
push button for cycle desired.
KITCHENAID DIVISION
FORM 12106F (Rev. 11-78) (Supsds. F 12106E, 6-76)
TROY. OHlO 45374
PAINTED IN U.S.A.