21
3.
Press START.
The set oven temperature will appear on the oven display
throughout cooking.
“Lo°” will appear as the probe temperature until the internal
temperature of the food reaches 130°F (54°C). Then the
display will show the temperature increasing in 5° increments.
When the set probe temperature is reached, the oven will shut
off automatically and “End” will appear on the oven display.
If enabled, end-of-cycle tones will sound, then reminder tones
will sound every minute.
4.
Press CANCEL OFF or open the oven door to clear the display
and/or stop reminder tones.
To Change Probe Temperature, Oven Setting:
Repeat previous steps.
If CANCEL OFF is pressed anytime when changing the probe
temperature, the set function will automatically be canceled and
the use of the temperature probe function will need to be reset.
To reset after CANCEL OFF has been pressed, unplug the probe
from the probe jack and plug back in. Close the oven door and
repeat previous steps.
After cooking, unplug the probe and remove food from oven. The
probe symbol will remain lit until the probe is unplugged from the
probe jack.
See “General Cleaning” section to clean probe.
Timed Cooking
Timed Cooking allows the oven to be set to turn on at a certain
time of day, cook for a set length of time, and/or shut off
automatically. Delay start should not be used for food such as
breads and cakes because they may not bake properly.
To Set a Cook Time:
1.
Press BAKE, CONVECTION BAKE or CONVECTION ROAST.
On some models, press the number pads to enter a
temperature other than the one displayed.
On some models, press the TEMPERATURE “up” or “down”
arrow pads (buttons) to enter a temperature other than 350°F
(177°C).
2.
Press COOK TIME.
3.
Press number pads to enter the length of time to cook.
On some models, press the TEMPERATURE “up” or “down”
arrow pads (buttons) until the correct time shows on the
display.
4.
Press START.
On some models, the start time, stop time, vertical bar
countdown and minute time countdown will appear on the
oven display.
When the stop time is reached, the oven will shut off
automatically and “End” will appear on the oven display.
If on, end-of-cycle tones will sound, then reminder tones will
sound every minute.
5.
Press CANCEL OFF or open the oven door to clear the display
and/or stop reminder tones.
To Set a Cook Time and Stop Time:
Before setting, make sure the clock is set to the correct time of
day. See “Clock” section.
1.
Press BAKE, CONVECTION BAKE or CONVECTION ROAST.
Press the number pads to enter a temperature other than the
one displayed.
On some models, press the TEMPERATURE “up” or “down”
arrow pads (buttons) to enter a temperature other than 350°F
(177°C).
2.
Press COOK TIME.
3.
Press number pads to enter the length of time to cook.
On some models, press the HR and MIN “up” or “down”
arrow pads (buttons) until the correct time shows on the
display.
4.
Press STOP TIME.
5.
Press the number pads to enter time of day to stop.
On some models, press the HR and MIN “up” or “down”
arrow pads (buttons) until the correct time shows on the
display.
6.
Press START.
The start time is automatically calculated and displayed.
“DELAY” and the stop time will also appear on the oven
display.
When the start time is reached, the oven will automatically
turn on. On some models, the vertical bar countdown and
minute time countdown will appear on the oven display.
On some models, the set temperature and minute time
countdown will appear on the oven display.
When the stop time is reached, the oven will shut off
automatically and “End” will appear on the oven display.
If on, end-of-cycle tones will sound, then reminder tones will
sound every minute.
7.
Press CANCEL OFF or open the oven door to clear the display
and/or stop reminder tones.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result
in burns.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour
before or after cooking.
Doing so can result in food poisoning or
sickness.