Filter
Top Products
12
■ If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
■ The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
Slide Controls (on some models)
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the “mid-settings” as shown.
Style 1
Style 2
IMPORTANT:
■ For Style 1, your product will not cool when the Refrigerator
control is set to OFF. For Style 2, your product will not cool
when the Freezer Control is set to OFF.
■ Settings to the left of the mid-setting make the temperature
less cold. Settings to the right of the mid-setting make the
temperature colder.
■ The Automatic Exterior Moisture control continuously guards
against moisture buildup on the outside of your refrigerator
cabinet. This control does not have to be set or adjusted.
Adjusting Slide Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
If you need to adjust temperatures:
■ Slide the FREEZER or REFRIGERATOR control, one setting to
the right or left depending on the needed temperature
change.
NOTE: For Style 1, after adjusting the refrigerator
temperature, wait 24 hours and then recheck the FREEZER
temperature before making additional adjustments.
Electronic Controls (on some models)
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the “mid-settings” as shown.
To turn on refrigerator:
■ Press and hold ON/OFF for 2 seconds. The indicator lights
show the current temperature control settings.
NOTE: Settings to the left of the mid-setting make the
temperature less cold. Settings to the right of the mid-setting
make the temperature colder.
Adjusting Electronic Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
If you need to adjust temperatures:
■ Press the FREEZER or REFRIGERATOR arrow to move the
indicator light to the right, one setting at a time. Continue
moving the indicator light until it is at the desired setting.
NOTE: With each press of the arrow, you will hear a beep as
the light moves to the next setting. The indicator light moves
to a setting of “7” and then returns to the setting of “1.”
Additional Electronic Control Panel Features
Additional features are located on the control panel at the top of
the refrigerator compartment.
Water Filter Indicator Light and Reset
See “Water Filter Status Light.”
Accelerated Ice Production
This feature assists with temporary periods of heavy ice usage by
increasing ice production over a 24-hour period.
■ Press ICE touch pad to set the freezer temperature to -10°F
(-23°C). The Accelerated Ice setting will remain on for
24 hours unless manually turned off. The display will continue
to show your normal temperature set point.
CONDITION: SETTING ADJUSTMENT:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR Control
one setting lower
REFRIGERATOR too warm
High use or room very warm
REFRIGERATOR Control
one setting higher
FREEZER too cold
Not set correctly for conditions
FREEZER Control one
setting lower
FREEZER too warm/too little ice
High use or heavy ice usage
FREEZER Control one
setting higher
Refrigerator
off
colder
1
234
Freezer
cold
colder
1
234
Colder
Freezer
Off
1
2
3
4
Cold
Colder
Refrigerator
1
2
3
4
CONDITION: SETTING ADJUSTMENT:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR Control
one setting lower
REFRIGERATOR too warm
High use or room very warm
REFRIGERATOR Control
one setting higher
FREEZER too cold
Not set correctly for conditions
FREEZER Control one
setting lower
FREEZER too warm/too little ice
High use or heavy ice usage
FREEZER Control one
setting higher